moisture.IQ Analyzer

  • Multi-channel Moisture & Oxygen Analyzer The most versatile moisture analyzer on the market
  • Real-time Touch Screen Display 6 or 12 measurements can be displayed at one time
  • Available With 2 Module Bays Significantly reduces cost per measurement
Product Options

Overview

The moisture.IQ Analyzer is a multi functional, multi-channel analyzer used wherever moisture impacts the quality, efficiency or performance of a product or process. It will measure moisture in gases, non-aqueous liquids and oxygen in gases.

This moisture analyzer has been newly designed with touchscreen display with a graphic-based interface making this easy to use. This is one of the most versatile moisture analyzers as it will allow two additional transmitters and an oxygen measurement to each available channel. Specifically designed for permanent installations, it can be used in conjunction with the GE Moisture Image Series and M Series moisture probes.

Manufactured by: Panametrics
Model: moisture.IQ Analyzer

Services offered for this product

  • Sales
  • Rental
  • Installation
  • Calibration
  • Maintenance

Applications

Petrochemical
Natural gas
Industrial gas
Semiconductor
Furnace gas/heat treating
Power generation
Air dryer
Pharmaceutical
Aerospace

Specification

Electronics
Intrinsic Safety All non-auxiliary inputs are intrinsically safe through internal isolation and energy-limiting circuitry.
Inputs Two module bays are available. Each module bay can accommodate a 1-channel or 3-channel module. Each channel can accept:
  • 1 Moisture input (MIS Probe or M Probe)
  • 1 Temperature input (MIS Probe or M Probe)
  • 1 Pressure input (MIS Probe)
  • 1 Oxygen input (electrochemical sensor)
  • 2 Auxiliary inputs
Analog Outputs 2 per available channel
Measurement Alarm Relays 2 per available channel
Fault Condition Alarm Relay 1 per meter
Dimensions (w x h x d) and Weight
  • Rack mount: 482 x 133 x 357 mm (19.0 x 5.2 x 14.1 in.); 11.2 kg [24.7 lb.]
  • Bench mount: 440 x 133 x 357 mm (17.4 x 5.2 x 14.1 in.); 10.4 kg [22.9 lb.]
  • Panel mount: 542 x 201 x 357 mm (21.4 x 8.0 x 14.1 in.); 11.3 kg [25.0 lb.]
  • Weatherproof: 508 x 508 x 229.8 mm (20.0 x 20.0 x 9.05 in.); 24.9 kg (55 lb.)
  • Explosion-Proof: 590.6 x 590.6 x 304.8 mm (23.25 x 23.25 x 12.0 in.); 113.6 kg (250 lb.)
Moisture Measurement
Type Panametrics Moisture Image Series and M Series thin-film aluminum oxide probes
Calibration Ranges (Dew/Frost Point)
  • Standard: 50 to -112°F (+10 to –80°C) with data from +68 to -166°F (+20 to -110°C)
  • Ultralow: -58 to -148°F (–50 to –100°C) with data to -166°F (–110°C)
Accuracy (Dew/Frost Point)
  • ±3.6°F (±2°C) above -148°F (-100°C)
  • ±5.4°F (±3°C) below -148°F (-100°C)
Repeatability (Dew/Frost Point)
  • ±0.4°F (±0.2°C) above -148°F (-100°C)
  • ±0.9°F (±0.5°C) below -148°F (-100°C)
Operating Pressure 5 µ of Hg to 5000 psig (345 bar) limited by optional pressure sensor: see pressure sensor ranges
Temperature Measurement
Type Optional thermistor built into moisture probe
Calibration Ranges (Dew/Frost –22 to 158°F (–30 to 70°C)
Accuracy ±0.9°F (±0.5°C) at –22°F (–30°C)
Pressure Measurement
Type Optional transducer built into Moisture Image Series moisture probes or standard external pressure transmitter
Full-Scale Ranges Available
  • 300 psig (21 bar)
  • 500 psig (35 bar)
  • 500 psig (35 bar)
  • 3000 psig (207 bar)
Accuracy ±1% of full scale
Pressure Rating Three times the span of the available range to a maximum of 7500 psig (518 bar)
Oxygen Measurement
Type Electrochemical sensor
Available Sensor Ranges / Accuracy ppb O2 Range
  • DFOX-1, 0 to 500 ppb/5 ppm/50 ppm, 1/4 VCR
    ± 3% of reading or 25 ppb
ppm O2 Range
  • DFOX-9, 0 to 1/10/100 ppm, 1/4 VCR
  • DFOX-2, 0 to 1/10/100 ppm, 1/8 compression
    ± 3% of reading or 50 ppb
  • DFOX-3, 0 to 10/100/1000 ppm, 1/8 compression
    ± 3% of reading or 200 ppb
  • DFOX-4, 0 to 100/1000/10,000 ppm, 1/8 compression
    ± 3% of reading or 2 ppm
  • DFOX-5, 0 to 50/500/5,000 ppm, 1/8 compression
    ± 3% of reading or 1 ppm
% O2 Range
  • DFOX-6, 0 to 5%, 1/8 compression
    ± 3% of reading or 10 ppm
  • DFOX-7, 0 to 10%, 1/8 compression
    ± 3% of reading or 20 ppm
  • DFOX-8, 0 to 25%, 1/8 compression
    ± 3% of reading or 50 ppm
Pressure Rating 0.2 to 1 psig (0.07 bar)

Downloads