Solinst Levelogger Edge (DISCONTINUED - SEE LEVELOGGER 5)
- Robust and Corrosion Resistant Hastelloy pressure sensor and Titanium based PVD coating
- Built-in Datalogger Memory capacity for up to 120,000 data points
Overview
Please note: the Levelogger Edge has been discontinued and replaced by the Levelogger 5. It is still available for rental.
The Levelogger Edge Water Level Datalogger has enhanced features which definitely gives it an “edge” over previous Levelogger versions.
It is an automatic absolute water level logger which records water level and temperature to a high accuracy. The Edge water level dataloggers has infra-red data transfer and an industry leading 10 year (1-minute intervals) battery life. Deployment can be with either a Direct Read Cable, wireline or Kevlar cord. The Levelogger Edge water level datalogger has a memory capacity to store up to 120,000 water level and temperature data points
The Edge Levelogger features the new Hastelloy® pressure sensor and Titanium based PVD coating which provide improved stability and reliability, increased corrosion resistance in harsh environments, as well as improved stability of readings in extreme pressure and temperature conditions. It also has a wider temperature compensated pressure range (0 to 50°C, -10 to 50°C for Barologger Edge), and improved thermal response time. The sensor, built from Hastelloy, can withstand 2 times over-pressure without permanent damage.
A new version of software, Version 4.0, has been written to support the Levelogger Edge, Levelogger Junior, LTC Levelogger Junior, Rainlogger and Leveloader. Version 4.0 provides new features, including the ability to compensate for barometric pressure on multiple Levelogger data files simultaneously. It makes programming data loggers and viewing data easier. More useful programming options are now available including compressed and repeat sampling, and a future stop option. Downloading data is now faster, due to the increased communication speed between the Levelogger Edge datalogger and the PC with the new Optical Reader.
Manufactured by: Solinst
Model: Solinst Levelogger Edge (DISCONTINUED - SEE LEVELOGGER 5)
Services offered for this product
- Sales
- Rental
- Installation
- Calibration
- Maintenance
- IoT Cloud Compatible
Applications
Aquifer characterization: pumping tests, slug tests, etc
Mine water and landfill leachate management
Stream gauging, lake and reservoir monitoring
Watershed, drainage basin and recharge monitoring
Wetlands and stormwater run-off monitoring
Harbour and tidal fluctuation measurement
Long-term water level monitoring in wells, surface water bodies and seawater environments
Water supply and tank level measurement
Specification
| Level Sensor | Piezoresistive Silicon with Hastelloy Sensor |
| Accuracy | ±0.05% FS (Barolgger Edge: ± 0.05 kPa |
| Stability of Readings | Superior, low noise |
| Units of Measure | m, cm, ft., psi, kPa, mBar, °C. °F (Barologger Edge: psi, kPa, mBar, °C, °F) |
| Resolution | 24 Bit Resolution |
| Normalisation | Automatic Temperature Compensation |
| Temp. Comp. Range | 0° to 50°C (Barologger Edge: -10 to +50°C) |
| Temperature Sensor | Platinum Resistance Temperature Detector |
| Temp. Sensor Accuracy | ± 0.05°C |
| Temp. Sensor Resolution | 0.003°C |
| Battery Life | 10 Years - based on 1 reading/minute |
| Clock Accuracy | ± 1 minute/year (-20°C to 80°C) |
| Operating Temperature | -20°C to 80°C |
| Maximum # Readings | 40,000 readings FRAM memory, or up to 120,000 using linear data compression |
| Memory | Slate and Continuous |
| Communication | Optical Infrared Interface. Conversion to RS-232, USB, SDI-12. Serial at 19,200 bps, 38,400 bps with USB |
| Size | 7/8" x 6.25" (22 mm x 159 mm) |
| Weight | 4.6 oz. (129 grams) |
| Corrosion Resistance | Titanium based PVD coating |
| Other Wetted Materials | Delrin, Viton, 316L stainless steel, Hastelloy, Titanium based PVD coating |
| Sampling Modes | Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View |
| Measurement Rates | 1/8 sec to 99 hrs |
| Barometric Compensation | Software Wizard and one Barologger in local area (approx. 20 miles/30 km radius) |
| Models | Full Scale (FS) | Accuracy (Typical) |
|---|---|---|
| Barologger | Air only | ± 0.05 kPa |
| F15, M5 | 16.4 ft., 5 m | ± 0.010 ft., 0.3 cm |
| F30, M10 | 32.8 ft., 10 m | ± 0.016 ft., 0.5 cm |
| F65, M20 | 65.6 ft., 20 m | ± 0.032 ft., 1 cm |
| F100, M30 | 98.4 ft., 30 m | ±0.064 ft., 1.5 cm |
| F300, M100 | 328.1 ft., 100 m | ± 0.164 ft., 5 cm |
Downloads
Accessories
Related products
FAQ's
The free app is available on both Apple® and Android™ smart devices.
Apple devices must be running iOS 11 or later on the following compatible devices:
- iPhone
- iPad
- iPad mini
- iPod touch.
Android devices must be running version 5.0 or higher. Solinst does not guarantee compatibility on all devices running 5.0, but testing confirms the following can be used:
- Phone: Samsung Galaxy S4 - Model SGH-1337M
- Phone: Samsung Galaxy S5 - Model SM-G900W8
- Tablet: Samsung Tab 4 (10.1”) - Model SM-T530NU
As the Levelogger App Interface will not connect directly to the top of a Solinst datalogger, it is necessary to have connection accessories. With the Levelogger or Rainlogger, one of the following accessories is required:
- Direct Read Cable, clients use this option to suspend dataloggers in the field when they wish to communicate downhole.
- When working with Leveloggers that are suspended from wireline, or cord, the units must be removed from the well and connected to either a Direct Read Cable (as above) or an Optical Adaptor.
- For the LevelVent, just connect to the unit via the Vented Cable and LevelVent Wellhead that all units are suspended from in the field – no other connection accessories are required.
- The AquaVent communication connection is made from the App Interface to the AquaVent Wellhead using an App Connector Cable that is ordered separately.
- Program and start dataloggers in the field.
- Simplify data management in the field by transporting and using less equipment.
- View real-time readings.
- Download and e-mail logged data files.
- Calibrate LTC Leveloggers (NEW).
- Run the diagnostic utility (NEW) – used for troubleshooting
Leveloggers. Provides detailed information on the datalogger,
and includes options for running a self-test, doing a memory
dump and creating/emailing reports.